Product Description Description Maydos Concrete Effect is an interior/exterior water based paint that creates the textural effect of polished concrete. Apply Concrete effect with a roller and finish off with a steel trowel to achieve the concrete appearance. Features Creates the textural effect of polished concrete Benefits Adds interest and style to any location Where to use New renderings or old plasters Concrete surfaces Old paints or dry, compact, absorbent, mineral coatings Various absorbent mineral substrates Insulating systems Plaster boards
Maydos Concrete Effect is an interior/exterior water based paint that creates the textural effect of polished concrete. Apply Concrete effect with a roller and finish off with a steel trowel to achieve the concrete appearance.
Creates the textural effect of polished concrete
Adds interest and style to any location Where to use
New renderings or old plasters
Old paints or dry, compact, absorbent, mineral coatings
Various absorbent mineral substrates Insulating systems
Plaster boardsTechnical Data
|Gloss Level||Matt paint effect|
|V.O.C. Level||4.5g/L tinted|
|The product is applied by||Brush ; Roller ; Trowel|
|Cleaning of painting tools||Water|
|Theoretical coverage||1.0 – 1.7 kg/m2 in two coats, depending on the kind of substrate.|
|Surface Preparation||For previously painted surfaces that are in good condition, dust, then clean with soap.|
|For surfaces with cracks or holes, repair with appropriate filler.|
|Spot prime repairs with Maydos Primer Sealer Undercoat.|
|For glossy surfaces lightly sand to a dull finish.|
|For Plasterboard, Brick, Cement and bare timber apply 1 coat of Maydos Primer Sealer Undercoat.|
|For Set Plaster, Fibrous Plaster, or Plasterglass, apply 1 coat of Maydos Sealer Binder.|
|Application Procedure And Equipment||To ensure evenness of color, pour all cans of Maydos Concrete Effect into a clean dry container. Stir thoroughly prior to use.|
Before you begin, test your chosen application method on a large piece of board.
|Work in small sections. Use a long nap roller to apply Concrete Effect to the wall.|
|Smooth the surface with a steel trowel with broad, sweeping strokes, holding the trowel at a 60° to 80° angle. Be sure to keep the|
edge of trowel clean, by wiping any build up on the trowel edge with a wet cloth. Repeat this process over the entire wall.
|Apply 2-3 coats using the same process. Applying additional coats will enhance the depth and appearance of the finish. The final|
coat should dry for at least 2 hours, but no longer than 24 hours, before polishing.
|Using 600-grit sandpaper, lightly polish the surface in a circular motion. Use the edge of the trowel to further polish the|
surface. Apply enough pressure to keep the trowel edge flat against the surface. Be careful not to gouge the surface with the edge
of the trowel.
|For further protection, allow Concrete Effect to dry overnight and seal with one coat of Maydos wall varnish as overcoat.|
|Recommended paint system|
|Primer||Maydos anti-alkali primer M-003 : 1 coat|
|Top Coat||Maydos concrete effect paint : 2-3 coats|
|Over Coat (optional)||Maydos wall varnish : 1 coat|
|Shelf Life||12 months in sealed cans|
|Storage||Store in cool, dry and good ventilated place.Temperature range: 0°C-35°C.|
1.How can you prove that you are a paint manufacturer rather than a trading company?
As the one of The Top 5 paint manufacturer in China.We have many years of experience since 1996 in production and export,welcome to visit our factory at any time.
2.How about the price ?
We can offer the best wholesale price which depend on the quantity of the order.
3.I need to make sure the quality and the color .
Our pleasure!We can offer the liquid Free sample for you to test and color chart.
4.If the product is not ideal, what can we do?
We have perfect after-sales service to help to complete the construction smoothly.
Even if there are any unexpected things in your order, we will assist to solve them.
5.What's your MOQ (min order quantity),production period and delivery time?
Our MOQ is 200Kg. We accept mixed order and the production period and delivery time are 7-10 days.
6.I want to put my Logo on the packing .
We can accept the OEM, waiting for your details requirement.
Mr.Brian ChenMobile: 008617620807735Wechat & Whatsapp: 008617620807735Email: [email protected]